useful_linux_802.11_commands_for_statistics_and_monitoring_purposes
This is an old revision of the document!
Commands Useful for Access Points
For the purposes of clarity, these are examples, not prototypes.
Get stats on all the wireless clients connected to your access point.
$ sudo iw dev wlan0 station dump
Station 80:19:34:62:17:81 (on wlan0)
inactive time: 1000 ms
rx bytes: 56189
rx packets: 525
tx bytes: 2806639
tx packets: 28253
tx failed: 0
signal: -65 [-65] dBm
tx bitrate: 72.2 MBit/s
rx bitrate: 65.0 MBit/s
authorized: yes
authenticated: yes
associated: yes
WMM/WME: yes
TDLS peer: yes
DTIM period: 2
beacon interval:100
short slot time:yes
connected time: 788 seconds
useful_linux_802.11_commands_for_statistics_and_monitoring_purposes.1584059591.txt.gz · Last modified: 2020/03/13 00:33 by sgriggs